Parker brass push in tube fittings

Parker® brass Prestolok® tube fittings

Parker has one of the most advanced brass push-in fittings. Prestolok's "elastic teeth" stainless steel grab ring technology was not only invented by but was perfected by Parker. These Prestolok brass fittings can be used with most thermoplastic and copper tubing. Male pipe threads come standard with white sealant pre-applied. While the male pipe thread swivels for precision positioning and installation in tight places, these are not recommended for applications that need a live swivel.

Working Pressure: up to 300 PSI depending on tubing used.

Working Temperature: 0 - 200º F

Assemble

Cut thermoplastic tube squarely. Metal tubing should be free of burrs. Mating tube end needs to be free of dirt and debris.

Insert tube until it reaches bottom of fitting port. A slight twisting motion will ease the insertion. Then pull on tubing to make sure it is secure

Disassemble

Push the release button in towards the brass body and remove tubing

Various Sizes Available

62 PL Union Purchase Here!	62 PLBH Bulkhead Union Purchase Here!
66PL Female Connector Purchase Here!	68 PL Male Connector Purchase Here!
164 PL Union Tee Purchase Here!	165 PL Union Elbow Purchase Here!
169 PL 90º Male Elbow Swivel Purchase Here!	171 PL Male Run Tee Swivel Purchase Here!
172 PL Male Branch Tee Swivel Purchase Here!	Tube size, Pipe Thread (NPT) Length and opening diameter available on purchase pages.

Hardware Division