Hamilton XE validator currency acceptor

*VERY IMPORTANT for XE Validator Orders*
	Click on purchase information to go to our purchase page.
	The XE Validator comes with a modified chute. Similar to the one on the left one.
For older model changers and Autocashiers: If you are currently using an bill acceptor/HVX validator that has a chute similar the one to the right or is similar but has a longer snout, you will more than likely need a face plate to fit the new XE Validator into your existing changer or autocashier. If you purchase the validator with a face plate and find you do not need the face plate, just let us know and we will be happy to take the face plate back without the restocking fee. Not sure what to do? Call us at 1-800-441-7897
If you do need a face plate - please refer to your machine model # as below
*Please note the configuration listed to determine the appropriate faceplate needed.* Machine is currently using an XE validator w/chute · There are no extra parts needed. You can simply purchase your XE validator through our site, Machine is currently using an XE or HV7 validator and the faceplate used on the machine is curled in toward the validator. · Part #60-2216 is needed Machine is an SS-1, H-1, or HS Series · Part #60-2216 Validator Face Plate is needed Machine is currently using a chrome-plated faceplate with six rivets, and is curled in toward the validator. · Part #60-0001 Face Plate is needed Machine is currently using an STA validator and it has a slider faceplate · Part #60-0282 Face Plate is needed

1-800-441-7897

Hamilton XE Validator