pneumatic air filter regulator NAW2000

Proper Installation:	Air Flush piping before installation. Use of the piping adaptors will ease installation.
Setting	Check Supply pressure before adjusting pressure. The adjustment knob is a locking type. Pull the knob away from the body until the orange band is visible. Adjust as necessary and push the knob back into it's locked position to prevent accidental setting changes. Clock wise rotation of the knob results in a pressure increase and vice-versa.
Minimum Pressure	Minimum operating pressure 15 pSIG (.1MPa)
Tubing	Soft nylon tube of more than 3/32 in (4mm) or greater is recommended for drain piping. The over all length should be less than 16.5 ft. (5mm) Be sure not to have any upward turns in the piping
Install	Vertically
Maintenance	Filter element to be changed after 1 year or when pressure drop of 15 psi (0.1 MPa) is reached