pneumatic air filter air dryer NAW2000

Air Filter, Air Dryer, Mist separator

NAW is no longer available but we do have replacement bowls

Automatic car wash Air Filter NAW2000

NAW2000 air filter for pneumatics. Zinc die cast body.

Port Size 1/4"

We have both the zinc automatic drain bowl available as well as the pictured polycarbonate bowl.

Proper Installation:	Air Flush piping before installation. Use of the piping adaptors will ease installation.
Setting	Check Supply pressure before adjusting pressure. The adjustment knob is a locking type. Pull the knob away from the body until the orange band is visible. Adjust as necessary and push the knob back into it's locked position to prevent accidental setting changes. Clock wise rotation of the knob results in a pressure increase and vice-versa.
Minimum Pressure	Minimum operating pressure 15 pSIG (.1MPa)
Tubing	Soft nylon tube of more than 3/32 in (4mm) or greater is recommended for drain piping. The over all length should be less than 16.5 ft. (5mm) Be sure not to have any upward turns in the piping
Install	Vertically

Maintenance	Filter element to be changed after 1 year or when pressure drop of 15 psi (0.1 MPa) is reached

Poly carbonate bowls may fail if exposed to synthetic oils, thinner solvents, trichlorethylene, kerosene or other aromatic hydrocarbons. The poly carbonate bowl carries no warranties. When used in above atmospheres, please use the metal bowl.